SRW Diamond Blades

	Diamond Blades are laser welded for wet or dry usage. These quality blades are designed to provide fast, smooth cutting in a variety of materials: block, brick, pavers, concrete and stone. • Blade Comparison Chart • SPECIAL: Discontinued Blade flyer

PART NUMBER	DESCRIPTION	DIAMETER	EDGE THICKNESS	ARBOR	MAX. SPEED**
BU 04	Universal Wet/Dry Diamond Blade	4	.080	5/8", 7/8"	15,000
BU 07	Universal Wet/Dry Diamond Blade	7	.080	5/8", 7/8" -Diamond	8,730
BU 10	Universal Wet/Dry Diamond Blade	10	.125	1", 20mm	6,100
BU 12	Universal Wet/Dry Diamond Blade	12	.125	1", 20mm	6,300
BU14	Universal Wet/Dry Diamond Blade	14	.125	1", 20mm	5,460
BPPC 10	Paver Plus Segmented Turbo- Contractor - 8.5mm Segment Height	10	.090	-	6,115
BPPC 12	Paver Plus Segmented Turbo- Contractor - 8.5mm Segment Height	12	.125	1", 20mm	5,095
BPPC 14	Paver Plus Segmented Turbo- Contractor - 8.5mm Segment Height	14	.125	1", 20mm	4,365
BPPP 10	Paver Plus Segmented Turbo- Contractor - 10mm Segment Height	10	.090	-	6,115
BPPP 12	Paver Plus Segmented Turbo- Contractor - 10mm Segment Height	12	.125	-	5,095
BPPP 14	Paver Plus Segmented Turbo- Contractor - 10mm Segment Height	14	.125	-	4,365
BGPC 10	General Purpose - Contractor Grade	10	.090	-	6,115
BGPC 12	General Purpose - Contractor Grade	12	.125	-	5,095
BGPC 14	General Purpose - Contractor Grade	14	.125	-	4,365
BGPP 10	General Purpose - Premium	10	.090	-	6,115
BGPP 12	General Purpose - Premium	12	.125	-	5,095
BGPP 14	General Purpose - Premium	14	.125	-	4,365

USER TIPS	**This speed (RPM) represents the maimum safe speed (in revollutions per minute RPM) at whicheach blade can be used. Before using any blade, make sure the blade shaft (arbor) speed or the tool is within the "maximum safe" limit of that blade. Recommended Operating Speed (RPM) is approximately 75% of the Maximum Safe Speed (RPM). Blade shaft speeds (RPMs at no load) for most tools will be higher than the recommended operating speeds. Under normal sawing conditions, the actual blade shaft speed or the tool will slow down under load, and should fall within the optimum speed range.
RETURN TO TOP

Diamond Blades

Contact our friendly customer service or sales personnel for information.

PART NUMBER

DESCRIPTION

DIAMETER

EDGE THICKNESS

ARBOR

MAX. SPEED**

USER TIPS