skip to: page content | links on this page | site navigation | footer (site information)

Paver Sealer | Penetrating Paver Seal (PS)

PRODUCT CATEGORIES:Adhesives Diamond Blades Earthworks Edging Fabric & Fence Foundation Vents Geogrid Stabilizers/Sealers Stretch Wrap Product Index

Contact our friendly customer service or sales personnel for information.

	SRW (PS) Penetrating Paver Seal™ is a clear penetrating sealer. Used to protect and seal any clean and dry cementitious surface, above ground, vertical or horizonal. It protects the surface against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt, smog, industrial fumes, and most other atmospheric chemicals. It retains the original appearance of pavers, brick, block, stone, masonry, cultured stone and concrete surfaces with a non-yellowing UV resistant finish. • Product Info • Directions • User Tips • Safety Sheet (pdf) • Spec Sheet (pdf)


PART NUMBER	SIZE	# PER CARTON OR PALLET	LBS
SSPSPLUS GAL / SSPSPLUS CTN	1 Gallon	4/carton; 27 cartons/pallet	37/carton
SSPSPLUS 5GAL	5 Gallon	36/pallet	47/pail
SSPSPLUS 55GAL	55 Gallon	4/pallet	517/barrel

PRODUCT INFO	• Interior/Exterior • Horizontal and vertical application • Invisible/Penetrating finish • Seals and protects, minimizes salt/frost damage • Odorless, environmentally friendly, VOC compliant COVERAGE: 150-200 sq. ft. coverage per gallon

DIRECTIONS	Read product label throughly for important information and warnings. Thoroughly clean surface of joint sand, dust or loose material prior to application. Use SRW (EF) Efflorescence Cleaner for removal of efflorescence and SRW (CD) Cleaner/Degreaser for removal of stains, as necessary. Surface must be completely dry prior to sealer application. Recommended application tempertures are 50℉ (10℃) to 80℉ (27℃). Do not apply if inclement weather is forecasted within 24 hours. See www.srwproducts.com for application tips. Shake or stir thoroughly prior to use. Apply PS Paver Seal evenly with a sprayer, roller, or squeegee. Allow pavement to dry and cure 24 hours before subjected to normal traffic.

USER TIPS	Protect buildings, landscaping and vehicles from overspray or spray drift. For added slip resistance, use SRW (SR) Slip Resistant Paver Grip. For new pavement, let efflorescence (white mineral deposits) rise to the surface for at least 90 days before cleaning and sealing. When using on aged surfaces, make sure that surface is clean and that any damaged areas have been repaired. Surface may be damp or wet, however the dryer the surface, the better the absorption. Do not apply to structures under hydrostatic pressure. Lower temperatures or high humidity will increase drying time. For stronger, longer lasting paver joints use SRW Joint Set Sand Stabilizer. Apply yearly to retaining walls under harsh freeze/thaw (salt) conditions.
RETURN TO TOP

About Us | Index | Privacy Policy | Contact Us | © 2007 SRW Products